Taking of the bumper and take off and put on the grille is a tricky bussines,
for the 58 Pontiac.

Here is my way to do it, Step by step.

1. Losen both rubberstraps left and right side.
2. Losen both upper grille atahcements to horisental bar. 2x 3/8 sreews
3. Losen front bumper exenter bolts on frame 3/4 nuts. Lub DWD40.
4. Before take out bolts put some soft material or nice wood pices if bumper are in
good condition under it. ( here I put a empty plastic can under)



5. Take out exenter bolts and lower the bumper. If wheels are on car bumper will go
against the wheels and dont sving down al the way. (Like picture)
If car is a little bit raised and no wheels the bumper can hang down and its easy
to install and take of bumper. 

6. Now its easy to take of grille or mount it on bumper.

7. When bumper is hang down or you can have a board on a jack to adjust
height its time to take away the rear bolts. Those are little tricky course they
are ineside frame and need exact lengt of socket to remove nuts..

When bumper are in position as the picture above is also easy to remove or put
on hood bar extensions.



Time to put everything in pieces.

Please make notes or coments under komentarer.